70CM Repeater - Current Status:   Online

Input Frequency:                   434.425

Output Frequency:                 439.425

CTCSS:                                123Hz

The following systems are configured on the 70cm Repeater

IRLP:                              Online

Echolink:                         Online

See Chifley Internet Radio links at bottom of page for commands

2M Repeater - Current Status:   Online

Input Frequency:                   147.675

Output Frequency:                147.075

CTCSS:                                123Hz

The following systems are configured on the 2m repeater

Allstar:                              Offline

See Chifley Internet Radio links at bottom of page for commands

10M Repeater - Current Status:   Offline

Input Frequency:                 29.530  

Output Frequency:              29.630

CTCSS:                              None needed

Chifley Internet Radio Links

*NOTE:  IRLP and Echolink can only be used one at a time on the 70cm repeater

IRLP DTMF Commands

73 disconnect from a node.

#0 Link Status.

To connect to a node, type in the node number ie for the reflector in Adelaide SA, type 9550.

Echolink DTMF Commands

73 - disconnect from a node.

#0 - Link Status.

Asterisk followed by six digit node number - connect to a station (add leading zeros if the station id number has less than 6 digits).

Example - *001474 will connect to VK2RNC-R

Allstar DTMF commands

* 1 0 - connect to last used node.

* 1 <4 digit node number> - disconnect to this node.

* 3 <4 digit node number> - connect to this node.

* 7 - This connection status 2389 and 27681 are internal links.